Routing Multicast Trafik (PIMSM ve BSR)

Yapılandırma

Router1#configure terminal 
Enter configuration commands, one per line.  End with CNTL/Z.
Router1(config)#ip multicast-routing
Router1(config)#ip pim rp-address 192.168.15.5
Router1(config)#interface FastEthernet0/0
Router1(config-if)#ip address 192.168.1.1 255.255.255.0
Router1(config-if)#ip pim sparse-mode
Router1(config-if)#interface Serial1/0
Router1(config-if)#ip address 192.168.2.5 255.255.255.252
Router1(config-if)#ip pim sparse-mode
Router1(config-if)#end
Router1#

Router-RP1#configure terminal 
Enter configuration commands, one per line.  End with CNTL/Z.
Router-RP1(config)#ip multicast-routing
Router-RP1(config)#interface Loopback0
Router-RP1(config-if)#ip address 192.168.12.1 255.255.255.255
Router-RP1(config-if)# ip pim sparse-mode
Router-RP1(config-if)#exit
Router-RP1(config)#interface FastEthernet0/0
Router-RP1(config-if)#ip address 192.168.1.1 255.255.255.0
Router-RP1(config-if)#ip pim sparse-mode
Router-RP1(config-if)#exit
Router-RP1(config)#interface Serial1/0
Router-RP1(config-if)#ip address 192.168.2.5 255.255.255.252
Router-RP1(config-if)#ip pim sparse-mode
Router-RP1(config-if)#exit
Router-RP1(config)#ip pim rp-candidate loopback0 group-list 15
Router-RP1(config)#ip pim bsr-candidate loopback0 1
Router-RP1(config)#access-list 15 permit 239.5.5.0 0.0.0.255
Router-RP1(config)#access-list 15 deny any
Router-RP1(config)#end
Router-RP1#

Router-Border1#configure terminal 
Enter configuration commands, one per line.  End with CNTL/Z.
Router-Border1(config)#ip multicast-routing
Router-Border1(config-if)#interface FastEthernet0/0
Router-Border1(config-if)#ip pim sparse-mode
Router-Border1(config-if)#ip pim border
Router-Border1(config-if)#end
Router-Border1#